 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BC107 BC107B Low noise general purpose audio amplifiers Description The BC107 and BC107B are silicon planar epitaxial NPN transistors in TO-18 metal case. They are suitable for use in driver stages, low noise input stages and signal processing circuits of television receivers. The PNP complementary types are BC177 and BC177B respectively. TO-18 Internal schematic diagram Order codes Part Number BC107 BC107A Marking BC107 BC107B Package TO-18 TO-18 Packing Bag Bag November 2006 Rev 2 1/9 www.st.com 9 Electrical ratings BC107 - BC107B 1 Table 1. Symbol VCBO VCEO VEBO IC Ptot Tstg TJ Electrical ratings Absolute maximum rating Parameter Collector-emitter voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Total dissipation at Tamb 25C at Tcase 25C Storage temperature Max. operating junction temperature Value 50 45 6 100 0.3 0.75 -55 to 175 175 Unit V V V mA W W C C Table 2. Symbol Rthj-case Rthj-amb Thermal data Parameter Thermal resistance junction-case Thermal resistance junction-ambient __max __ max Value 200 500 Unit C/W C/W 2/9 BC107 - BC107B Electrical characteristics 2 Electrical characteristics (TCASE = 25C; unless otherwise specified) Table 3. Symbol ICBO V(BR)CBO Electrical characteristics Parameter Collector cut-off current (IE = 0) Collector-base breakdown voltage (IE = 0) Test Conditions VCB = 40V VCB = 40V IC = 10A IC = 10mA TC = 150C 50 45 6 IB = 0.5mA IB = 5mA IB = 0.5mA IB = 5mA VCE = 5V VCE = 5V VCE = 5V 110 200 VCE = 5V 120 40 VCE = 5V 250 300 VCE = 5V VCB = 10V VEB = 0.5V 2 150 450 450 550 70 200 750 950 650 700 700 770 250 600 Min. Typ. Max. 15 15 Unit nA A V V V mV mV mV mV mV mV Collector-emitter breakdown V(BR)CEO(1) voltage (I = 0) B V(BR)EBO VCE(sat) (1) Emitter-base breakdown voltage IE = 10A (IC = 0) Collector-emitter saturation voltage IC = 10mA IC = 100mA IC = 10mA IC = 100mA IC = 2mA IC = 10mA IC = 2mA for BC107 for BC107B IC = 10A for BC107 for BC107B IC = 2mA f = 1kHz for BC107 for BC107B IC = 10mA f = 100MHz IE = 0 f = 1MHz IC = 0 f = 1MHz IC = 0.2mA VCE = 5V f = 1kHz RG =2k IC = 2mA f = 1kHz for BC107 for BC107B B=200Hz VCE = 5V VBE(sat) (1) Base-emitter saturation voltage VBE(on) (1) Base-emitter on voltage hFE DC current gain hfe Small signal current gain CCBO CEBO NF Collector-base capacitance Emitter-base capacitance Noise figure 4 12 2 6 pF pF 10 dB hie Input impedance 4 4.8 k k 3/9 Electrical characteristics BC107 - BC107B Test Conditions IC = 2mA VCE = 5V 2.2 2.7 VCE = 5V 30 26 S S 10-4 10-4 Min. Typ. Max. Unit Symbol Parameter hre Reverse voltage ratio f = 1kHz for BC107 for BC107B IC = 2mA hoe Output admittance f = 1kHz for BC107 for BC107B (1) Pulsed: Pulse duration = 300 s, duty cycle 1 % 2.1 Electrical characteristics (curves) Figure 1. DC normalized current gain Figure 2. Collector-emitter saturation voltage Figure 3. Collector-base capacitance Figure 4. Transition frequency 4/9 BC107 - BC107B Figure 5. Power rating chart Electrical characteristics 5/9 Package mechanical data BC107 - BC107B 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 BC107 - BC107B Package mechanical data TO-18 MECHANICAL DATA mm MIN. A B D E F G H I L 45o 2.54 1.2 1.16 45o TYP. 12.7 0.49 5.3 4.9 5.8 0.100 0.047 0.045 MAX. MIN. inch TYP. 0.500 0.019 0.208 0.193 0.228 MAX. DIM. G I H D A L C F E B 0016043 7/9 Revision history BC107 - BC107B 4 Revision history Table 4. Date 01-Dec-2002 06-Nov-2006 Revision history Revision 1 2 First release The document has been reformatted Changes 8/9 BC107 - BC107B Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of BC10706
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |